| History |
| R.M. Wade and Co. was founded in 1865 to
serve farmers of the northwest and has continually operated
under the same purpose to this day. More... |
| About Us |
| R.M. Wade & Co. is a farm, outdoor power,
and lawn & garden equipment distrbutor. We have over 800
dealers in the Northwest ready to serve you. Our main areas of
coverage are Oregon, Washington, Idaho, Utah, and Montana. |
| Contact Us |
| If you would like to contact us, we can be
reached at sales@rmwade.com
or at (503) 641-1865.
Note: We currently do not sell direct
to consumers. |
|
|
|
|
88" PULVI-MULCHER
The 88" Pulvi-Mulcher has the basic features of the
larger "M" series in the Brillion line. It uses single transport
wheels. Rear scrapers and drawbar jack are standard. Machine is
raised and lowered by a 3" x 8" hydraulic cylinder (not
furnished). Two rows of spring teeth manually operated with depth
control lever. Rolling width is 7'4". Overall width is 7'10".
Tires not included.
|
|
|
"M"
MODEL
Single
Transport
Wheels
PULVI-MULCHERS
|
Manually operated tooth control. Rear scrapers are
standard on notched rollers. Safety lights and drawbar jack are
standard equipment. Requires a 3" x 8" hydraulic cylinder.
Hydraulic cylinder and tires not included. |
|
|
"MD"
MODEL
|
|
Dual
Transport
Wheels
|
PULVI-MULCHERS
Manually operated tooth control. Rear scrapers are
standard on regular rollers. Safety lights and drawbar jack are
standard equipment. Requires a 3 1/2" x 8" hydraulic cylinder.
Hydraulic cylinder and tires not included.
|
|
"ML" MODEL
PULVI-MULCHERS
12'6", 13'10", 15'2" and 18'9"
|
 |
| This series of Pulvi-Mulchers is
designed with a spread out frame design that permits good trash
flow. It features 20" Ductile notched or Ductile crowfoot rollers,
1 1/2" heavy duty bearings on the roller axles, and heavy duty
drawbar. The machine may be equipped with "C" shaped spring teeth
or "S" tine teeth. Drawbar jack, 3 1/2 x 16" cylinder, pressure
relief valve, and hydraulic hoses up to hitch point are included.
Rear scrapers are standard equipment with notched rollers.
Includes Warning Light Kit. Tires not included.
|
|
WL SERIES
FLAT FOLD-HYDRAULIC WING
21'8" AND 25'
PULVI-MULCHERS
|
|
Featuring the 20" Ductile Iron Wheel which carries
a 5-year limited warranty against breakage.This wing model
Pulvi-Mulcher features the 20" Ductile Iron Notched or Ductile
Iron Crowfoot wheels, 1 1/2" heavy duty bearings, and heavy duty
drawbar. Wings fold flat and give the machine a transport width of
13'11". Hydraulic cylinders, relief valve, hydraulic hoses to
hitch point included. Rear scrapers are standard equipment with
notched wheels. Safety warning lights are standard. Tires not
included. |
|
WL-360, 30 FOOT
PULVI-MULCHERS
FLAT FOLD - HYDRAULIC WING
|
 |
This wing Pulvi-Mulcher features the 20" ductile
iron rollers (which carry a 5-year limited warranty), and 1-1/2"
heavy-duty bearings on the roller axles. The wings fold flat and
give the machine a transport width of 16'9". Overall width (with
wings down) is 30'10". Rollling width is 30', overall length is
19'10". Overall height in transport is 6'4", road clearance is
10". This machine may be equipped with "C" shaped spring teeth or
"S" tine teeth. Rear scrapers, drawbar jack, cylinders and hoses
are included. Requires two hydraulic systems on tractor.
Recommended minimum of 200 H.P. Includes Warning Light Kit.
Tires not included. |
|
|
